User's Manual

Nov/5th/2002
11
MAC Access Control
With the Access Control Table enabled, you can authorize wireless units to access the
Access Point by identifying the MAC address of the wireless devices that are allowed
access to transmit data. To create or edit the Access Control Table, do the following:
Go to the MAC Access Control tab and select “Enable MAC Access Control”. Note that
when you enable the Access Control Table without any MAC address in the table, no
access is allowed to communicate with the Access Point.
Use the following buttons to manage the Access Control Table:
Add – to enter MAC addresses of authorized wireless devices one at a time
Modify – to change the entries in the table if you enter the incorrect MAC address
Remove – to remove MAC addresses one at a time
After add or modify any MAC addresses, click the APPLY button to make the
configuration take effect.
Hide AP Access
To prevent wireless stations access the Wireless LAN Smart Access Point. Wireless LAN
Smart Access Point also offers the Hide AP Access security option to restrict wireless
stations find and associate to the Wireless LAN Smart Access Point.