User's Manual

Firmware Upgrade Utility

When you finished the installations of the Wireless Access Point Utility, you can find the

Firmware upgrade utility in the programs, execute the Firmware upgrade utility, and it will

browse all the 11Mbps Wireless LAN Smart Access Point available on the network.

Select the Access Point you want to upgrade. Enter the default password and click the

Point as you desire.

Note: The default password to get access to the Wireless LAN Smart Access

Point is “default”.

Upgrade

This item is used for uploading the newest firmware of the Access Point. You may either

enter the file name in the entry field or browse the file by clicking the Open File button.

After choose the correctly file, click the Upgrade button to make the Firmware upgrade

take effect. For information about the release of the newest firmware, contact your local

reseller.