User's Manual

If you click Logout button, it will back to Login page.
Troubleshooting
Basic Functions
My Wireless AP will not turn on. No LED’s light up.
Cause
:  The power is not connected. Resolution:  Connect the
power adapter to your AP and plug it into the power outlet.
N
ote: Only use the power adapter provided with your AP. Using any other adapter may damage
your SOHO AP Router.
LAN Connection Problems
I can’t access my SOHO AP Router.
Cause
:
 The unit is not powered on.
 There is not a network connection.
 The computer you are using does not have a compatible IP Address.
Resolution
:
 Make sure your AP is powered on.
 Make sure that your computer has a compatible IP Address. Be sure that the IP Address
used on your computer is set to the same subnet as the AP. For example, if the APis set to
192.168.1.250, change the IP address of your computer to 192.168.1.15 or another unique IP
Address that corresponds to the 192.168.1.X subnet.
Use the Reset button located on the rear of the AP to revert to the default settings.
I can’t connect to other computers on my LAN.
Cause:
 The IP Addresses of the computers are not set correctly.
 Network cables are not connected properly.
 Windows network settings are not set correctly.
Resolution
:
 Make sure that each computer has a unique IP Address. If using DHCP through the AP ,
makes sure that each computer is set to “Obtain an IP Address automatically” and