User's Manual

13
The screen shown above is described in the following table:
Parameters Description
Device IP Address Settings
IP Address Assign an internal LAN IP address for this
Internet Gateway or leave it as the default
value “192.168.2.1.”
IP Subnet Mask Enter the subnet mask, you can usually
leave it as the default entry
“255.255.255.0”
Once you have filled in the above information, click the Next button to
continue to the next step.
8. (Step C) ISP Settings
Different ISPs require different methods of connecting to the Internet.
The ISP Settings section is where you input all the information required
by your ISP, so that you can connect to the Internet. There are 5
different types of ISP connections in the ISP Settings section. Select the
connection required by your ISP from the Select the ISP connection
type pull down menu and then proceed to that connection type step.
The 5 ISP connection types are as follow:
ISP Connection Type Description
Connect to Cable ISP (Step 8-1) Your ISP will automatically give
you an IP address
Static IP Settings (Step 8-2) Your ISP has given you an IP
address already
PPPoE Settings (Step 8-3) Your ISP requires you to use a
Point-to-Point Protocol over
Ethernet (PPPoE) connection.