User's Manual

18
Parameter Description
Connection ID Input this ID information only if your ISP has
given you one.
Connection Type Select ONE.
Always Connect - The VPN Gateway will always
connect with your ISP. If this is the case, the Idle
Time function is unavailable.
Trigger on Demand – Once the VPN Gateway
detects any packets want to get to Internet, the
VPN Gateway will connect with your ISP
automatically.
Manual – You can manually disconnect/connect
with your ISP for the WAN port (Cable/xDSL). If
this is the case, you have to go to the DEVICE
STATUS page and click Connect button to
establish the connection or click Disconnect
button to disconnect the connection.
Dynamic/Fixed Select ONE.
Dynamic - If your ISP will automatically assign
you an IP address
Fixed - If your ISP has given you a fixed IP
address already, then enter that IP address in the
IP assigned by your ISP
box. Also enter the
subnet mask (provided by ISP) in the IP Netmask
box
Note: Once you have filled in the above information, click “Next” to proceed
to the next step. Proceed to step 9 (Step D) ISP Additional Settings of this
manual