User's Manual

27
Parameter Description
Remote IPSEC Identifier Optional - This field allows you to identify
multiple tunnels; you don’t need to match
the name used at the other end of the
tunnel. You can enter a proper name in
this field; the default value for the Remote
IPSEC Identifier is, Remote
Enabled Keep Alive Optional - If this function is enabled, it will
keep this VPN connection alive
(connected)
Enabled NetBIOS Optional - This function allows NetBIOS
Broadcast broadcast to be transmitted in this VPN
connection
Remote Site Select One:
Single User – Select Single User if
the remote VPN site is a VPN client, e.g.
remote site has no Internet gateway.
The remote VPN client must have a
VPN client software installed (e.g.
Safenet or SSH etc.)
LAN – Select LAN if the remote VPN
site has an Internet gateway.
Remote IP Network This is the remote site’s NETWORK IP
address. (Single User – Input the actual
IP address of the Remote VPN client.
LAN – Input the network IP of the remote
gateway’s internal (private) network)