User's Manual

Parameter Description

Remote IP Netmask This is the remote site’s subnet mask

Remote Gateway IP/FQDN Input the remote site’s Gateway IP

address (for Remote Site – LAN only) or

the Fully Qualified Domain Name (FQDN).

FQDN consists of a host

and domain

name, including top-level domain. For

example, WWW.VPN.COM is a fully

qualified domain name. WWW is the host,

VPN is the second-level domain, and

COM is the top-level domain. When you

enter the FQDN of the remote site, the

VPN gateway will automatically seek the

IP address of that FQDN.

Note: In IKE Mode, if the Remote

Gateway IP has a dynamic IP address,

you must enter “0.0.0.0.” in the Remote

Gateway IP/FQDN field. In Manual Mode,

you must fill in the Remote IP, Remote IP

Network and Remote Gateway IP/FQDN

field (Remote Gateway IP/FQDN field

cannot be 0.0.0.0 for the manual mode).

See Appendix - VPN example.

Network Interface Select an interface type for the this VPN

connection