User's Manual

Parameter Description

Release (Disconnect) and Renew (Connect)

You can manually disconnect/connect with your

ISP for the WAN port (Cable/xDSL)

Click the Release (Disconnect) button - the

Internet Gateway will disconnect with the ISP.

Click the Renew (Connect) button - the Internet

Gateway will connect with the ISP.

Modem Dialup The modem (asynchronous port) can be used as

a backup Internet connection (dialup) for the

Cable/xDSL connection or as an Internet access

connection. If the current connection is via the

backup modem, it will show “Modem: Active,”

otherwise it will show “Not Active”.

Hang Up and Dial Up You can manually disconnect/connect with your

ISP for the asynchronous port (Dial Up/ISDN TA)

If the Modem Dialup shows Modem: Active,

clicking on the Hang Up button will

DISCONNECT the asynchronous port’s Internet

connection.

If the Modem Dialup shows Not Active, by

clicking on the Dial Up button - the Internet

Gateway will ESTABLISH an Internet connection

for the Gateway’s asynchronous port.

Device IP Shows the Device’s: LAN IP address, private

LAN MAC address and public WAN MAC

address.