User's Manual

4
The Gateway’s Rear View
The diagram below shows the Internet Gateway’s rear panel and is where all
the hardware connections are made.
Rear View Ports Description
Power (12VDC) The power port is where you connect the DC power
adapter
WAN The WAN 10M Ethernet port is where you connect your
ADSL/Cable modem.
Serial The Serial port is where you connect the 56K modem /
ISDN TA
Reset If you want the device to have the factory default settings,
press the reset button and hold it for 5 ~ 6 seconds. This
will load the factory default settings into the device.
Please be careful. Do not press the reset button
unless you want to clear the current configurations.
Ports 1-4 There are four LAN ports on the rear panel (supports
auto crossover). This is where you connect network
devices, such as PCs, switches, hubs, print servers, LAN
servers or other network devices.
12VDC