User's Manual

DHCP Server Settings

You can enable or disable the DHCP server. By enabling the DHCP server the

router will automatically give your LAN clients an IP address. If the DHCP is not

enabled then you’ll have to manually set your LAN client’s IP addresses. Make

sure the LAN Client is on the same subnet as this Internet Gateway if you want

this Internet Gateway to be your LAN client’s default gateway.

Parameter Description

Enable DHCP By default the Internet Gateway’s DHCP

Server Functions server is enabled. If you would like to disable the

DHCP server, unclick the Enable DHCP Server

Functions box (marked red - see screen above)