User's Manual

Parameter Description

DMZ Enter the IP address that you want to designate as the

DMZ server. The value ‘0’ means that the DMZ function

is disabled.

Virtual Server Settings

Internal IP Enter the LAN server/host IP address that the service

(Service Port Range) requests from the Internet will be

sent to.

Note: You need to give your LAN server/host a

fixed/static IP address for the Virtual Server to work

properly.

Service Port Range Enter the port numbers of the services (requests from the

Internet) that will be sent to the Internal IP address

(Specified above).

Note: If you only want one service port number e.g. 80

(HTTP) for the specified Internal IP address then enter

80 in both the service port range’s boxes.

The Table on the right side of the screen lists the most

popular applications and their port numbers.