User's Manual

For example, to prevent local users with IP addresses (ranging from 101 to 200)

from accessing websites (HTTP service - port 80), the settings are as follow:

LAN Side Filter Enabled: Enabled

Default LAN Side Filter: Pass

Filter: Block

Protocol: TCP

IP Address Range: 101 ~ 200

Destination Port Range: 80 ~ 80 (HTTP)

Filter Settings: WAN Filter Settings

The WAN Filter Settings allow the administrator to define whether a

remote/outside user(s) is permitted to access the private local area network. To

activate this feature, check WAN Side Filter Enabled and then define a filtering

policy. To define a filtering policy: enter the IP address range, enter the network

port number and select the transport protocol(s).