User's Manual

57
Parameter Description
PASSWORD SETTINGS You can setup the Internet Gateway so that a
password is required, in order to access its web-
based configuration pages. This password will be
required the next time you want to configure the
Internet Gateway. To setup a password, type
your password in the New Password field and
type it again in the Retype Password field to
reconfirm.
Note: It is important to remember your password.
If for any reason you lose or forget your password,
press the small reset button located on the back
of the device for 5~6 seconds. The Reset action
will reset the device to the factory default settings.
In factory default, the user name is admin and
there is NO password
SYSTEM ADMINISTRATION This allows remote user(s) to configure and
manage the Internet Gateway from a remote site
(through the Internet).
The default value of the HTTP port No is 80. You
can select a different port number to do the
remote web-based configuration
The default IP address of the Remote
administration host is: 0.0.0.0. (IP address
0.0.0.0 means that any remote PC can access
and manage the Internet Gateway from a remote
site). Either specify an IP address for the remote
administrator or leave it as the default.