User's Manual

7
When you setup the hardware installation please note the following.
1. Make sure that the power supply outlet voltage is compatible with the
power adapters of your PCs, Cable/XDSL modem and the Internet
Gateway.
2. For the Internet Gateway, only use the power adapter that comes with it.
3. Connect a network cable from your PC’s Ethernet port to one of the LAN
ports at the rear panel of the Internet Gateway. Do the same with all of
the PCs or switches/hubs you wish to connect to the Internet Gateway.
4. Connect the network cable from your Cable/XDSL modem to the WAN
Ethernet port at the rear panel of the Internet Gateway.