User's Manual

Chapter 2: Getting Started

To setup the Internet Gateway and get connected to the Internet; follow the

following step-by-step procedure:

1. Setup your hardware network installation (see Chapter 1 – Hardware

Installation setup)

2. Configure your network computers (LAN server/client/host) to “Obtain an

IP address automatically.” (See Appendix)

Note: By default the Internet Gateway’s DHCP is enabled - so by setting

your computer to “Obtain and IP address automatically” - you can

connect to the Gateway automatically.

3. Launch your web browser and type the router’s default IP address

(http:// 192.168.2.1) into the browser’s address box and press Enter.

Note: If you have setup your computer to use a static IP address:

Please make sure your PC’s IP address is in the same network as the

router’s. In windows 95/98 you can type WINIPCFG and in windows

2000/NT you can type IPCONFIG (see appendix) to find out if you are

on the same network.