User's Manual

6
Connecting One Ethernet-Device (as Station)
The station can be implemented on allowing only one client to access the
wireless network using MAC clone functionality. To connect with one client,
follow these steps:
1. Connect one end of the Ethernet Cable to the Station Adapter and the
other to the Ethernet-enabled device.
2. Connect the power adapter to station adapter’s power jack. The power
and the Ethernet status should light up.
3. Turn on the Ethernet-enabled device. When the station adapter is
associated to the Wireless AP and Wireless LAN traffic activity, you will
see the wireless LAN status lights up.
Connecting Multiple Ethernet-Devices (as Bridge)
The station can be implemented on allowing multi-clients to join a network.
When connecting to the wireless station adapter, the client who first begins
to send packet can associate with the access point that responds to the first
client’s request for connection based on MAC clone functionality. And the
others use the MAC address of the first client to join a wireless network. To
connect with multi-clients, follow these steps:
1. Connect one end of the Ethernet Cable to the Station Adapter and the
other to the hub.
2. Connect the Ethernet Cable between Ethernet-enable devices and the
hub.