User's Manual

3. Connect the power adapter to station adapter’s power jack. The power

and the Ethernet light should light up.

4. Connect the power adapter to the hub.

5. Turn on all Ethernet-enable devices. When the station is associated to the

Wireless AP and Wireless LAN traffic activity, you will see the wireless LAN

status lights up.

Note1: A hub could connect with up to 8 Ethernet-devices. However, it

would reduce the transmission rate if connected with too many units. (The

more units to connect with will produce less transmission rate.)

Note2: If all of your clients do not support TCP/IP protocol, only the first

client can connect to the wireless station adapter.