User's Manual

12
3-2 IP Setup
WAN/LAN Setup
By default, the Access Point can be configured as a Bridge or a Router. If you want the AP to
act as a DHCP server gateway for the wireless clients, use this feature. This AP accepts both
static and DHCP clients.
As a Bridge mode:
Static IP: The Access Point can provide you to assign a proper IP address to your wireless
access point manually.
DHCP Client: Enable this function to support the wireless access point to obtain the IP
address from the DHCP server on your network automatically.
Spanning Tree: This function provides network traffic optimization in settings with multiple
802.11 a/b/g SMB Access Points. You may Enable or Disable the Spanning Tree Protocol
used in the Access Point.