User's Manual

3-3 Wireless Setup

This section provides you to configure the wireless connections. Both 802.11a and 802.11g

can work simultaneously and configurations are located in this section. For the setting of each

band, please do the following.

Wireless LAN

The Wireless LAN Setup page lets you make changes to the wireless network settings. From

this window you can make changes to the wireless network name SSID, Broadcast SSID,

Wireless Mode, Channel/Frequency, Data Rate, and Output Power.

For 802.11a configuration, go to (WLAN1); for 802.11g, go to (WLAN2).

802.11a (5GHz)

802.11g (2.4GHz)

SSID: The SSID is a unique ID used by Access Points and Stations to identify a wireless

LAN. Wireless clients associating to any Access Point must have the same SSID. For 802.11a,

the default SSID is “Wireless-a”. For 802.11g, the default is “Wireless-g”. To change the

SSID, type in the SSID you like to use. It is case sensitive and must not exceed 32 characters.