User's Manual

Step 6: Right click “My Computer” from Start, select Properties, go to the Hardware tab

and click the Device Manager button to see if any error icon appears next to the NB 802.11b

Wireless Module. If no, your 11Mbps Wireless Module is working well.

After installing the Wireless Module, the Windows XP will display a “Wireless Network

Connection # ” message.

Click on the message and the “Automatic Wireless Network Configuration” will then appear

automatically and allow users to connect to an available wireless infrastructure network (Access

Point), shown as follows. You may click the Advanced button to make advanced configuration

for the Wireless Module, shown as below.

Check if there is exclamation

mark next to the NB 802.11b

Wireless LAN PCMCIA Card