User's Manual

Chapter 2 Getting Started

This chapter describes the instructions that guide you through the proper installation of your

11Mbps Wireless Module for the Windows XP/2000/ME/98 operating systems.

The complete installation of the 11Mbps Wireless Module consists of the following steps:

STEP 1: Insert your Wireless Module into your notebook.

STEP 2: Install the corresponding driver and utility.

STEP 3: Set basic settings.

STEP 4: Finish Installation.

2-1 Before Installation

In addition to the items shipped with the client card, you will also need the following in order to

install the card:

1. A computer equipped with a Type II or Type III PCMCIA slot, and a PCMCIA card and

socket services compliant with revision 2.10 of the PCMCIA specification (or higher).

2. Windows XP/2000/98/ME (with a Windows installation CD-ROM, diskettes for use during

installation)

3. Minimum 500 Kbytes free disk space for installing driver and utility program.

2-2 Insert the 11Mbps Wireless Module

To install the 11Mbps Wireless Module, please do the following:

1. Find an available Type II or Type III PCMCIA slot on your computer.

2. With the Wireless Module’s 68-pin connector facing the PCMCIA slot and its label facing

up, slide the PCMCIA adapter completely into the PCMCIA slot.