Installation Guide

2
11Mbps Wireless LAN CF Card
Quick Start Guide
I. Network Configuration
11Mbps Wireless LAN CF Card is an IEEE802.11/802.11b compliant CF Type I DSSS wireless
LAN adapter. It fully supports wireless networking under Windows 2000/XP/CE.
¨
11Mbps Wireless CF Card can be operated in Ad-Hoc or Infrastructure network configurations.
Ad-Hoc mode allows 11Mbps Wireless LAN CF Card users to join a Basic Service Set (i.e.,
peer-to-peer mode, without access point). Infrastructure mode allows 11Mbps Wireless LAN
CF Card users to join an Extended Basic Service Set (i.e., connect to access point)
II. Package Content
11Mbps Wireless LAN CF Card x 1
Quick Installation Guide x 1
Product CD-ROM x 1
III. Wireless LAN CF Card and Utility Installation under Pocket PC/Handheld PC
Installation of the 11Mbps Wireless LAN CF Card under CE 3.0/Pocket PC 2002
1. Establish a connection between host PC and PDA (only for hand-held) device by Microsoft
Active Sync program.
2. Insert and run SanDisk AutoRun Program Source CD-ROM/Pocket PC 2002 to install
the driver and utility.
3. Once SanDisk ConnectPlus Front Page appears, click on ‘Installation’
4. Following the necessary prompts. Once SanDisk ConnectPlus Front Page re-appears, click
‘Exit’
5. Click ‘OK’ and reset your Pocket PC accordingly.
6. Insert the 11Mbps Wireless LAN Compact Flash Card into the compact flash slot of your
PDA (only for hand-held). The PDA (only for hand-held) will auto-detect the Wireless
LAN Compact Flash Card and automatically install the corresponding driver.
Infrastructure
Network
Ad-hoc
Network
Wired
Network
Wireless
Network
Access Point