User's Manual

-27-
Fig. Create Encryption Keys Using a Passphrase (128-bit)
Create Keys Manually
You can also create encryption keys manually by clicking the Create Keys Manually
check box.
For 64-bit encryption you may choose:
 Alphanumeric: 5 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g.
MyKey)
 Hexadecimal: 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g.
11AA22BB33)
For 128-bit encryption you may choose:
 Alphanumeric: 13 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(e.g. MyKey12345678)
 Hexadecimal: 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g.
00112233445566778899AABBCC).
After entering the WEP keys in the key field, select one key as active key, click the OK
button and then click the Apply button on the Configuration tab to make the setting take
effect.