User's Manual

Range Coverage
(Typical range in open
environment with 0
dBi Antenna)
IEEE 802.11a
♦
54Mbps:
≧
80 meter
♦
48Mbps:
≧
120 meter
♦
36Mbps:
≧
150 meter
♦ 24/18Mbps:≧ 200 meter
12/9/6Mbps:
≧
240 meter
Operating
Frequency
IEEE 802.11a
♦ USA(FCC): 5.15GHz ~ 5.25GHz ; 5.25GHz ~ 5.35GHz; 5.47 GHz ~ 5.725
GHz
5.725 GHz ~ 5.825 GHz;
♦ Europe(ETSI): 5.15 GHz ~ 5.35 GHz ; 5.47 GHz ~ 5.725 GHz
♦ Japan(TELEC) :: 5.15 GHz ~ 5.25 GHz
Software Specification
Supported OS Identical to Atheros Latest Version
Security Identical to Atheros Latest Version
Physical Specification
Dimension 59.6mm(L) * 44.5mm(W) * 3.25mm(H)
Weight TBD
Environment Specification
Temperature (Ambient) Humidity (non-condensing)
Operating
0 ~ 55
℃
90%
Storage
-20 ~ 80
℃
5 ~ 90%
Warranty
12 months
4. Hardware Installation
The following sections in this chapter describe how to install XA-622H Module
4.1. Installation Overview
XA-622H wireless module is design for Access Point, Router, and so forth.
4.2. Safety Recommendations
The safety guidelines are as follows:
λ
Keep the board area clear and dust-free before, during, and after installation.
λ
Keep tools away from walk areas where you and others could fall over them.
λ
Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains, that
could get caught in the board.
λ Wear safety glasses if you are working under any conditions that might be
hazardous to your eyes.
λ
Do not perform any action that creates a potential hazard to people or makes
the equipment unsafe.
λ Never attempt to lift an object that is too heavy for one person to handle.
4.3. Maintaining Safety with Electricity
Warning: Before working on a board or working near power supplies, unplug the power
cord on AC units; on DC units, disconnect the power at the circuit breaker
.
Follow these guidelines when working on equipment powered by electricity:
λ
Do not work alone if potentially hazardous conditions exist anywhere in your
work space.
λ Never assume that power is disconnected from a circuit; always check the