User's Manual

circuit.

extension cables, frayed power cords, and missing safety grounds.

λ If an electrical accident occurs, proceed as follows:

– Use caution; do not become a victim yourself.

–

Disconnect power from the system.

– If possible, send another person to get medical aid. Otherwise, assess the condition of

the victim and then call for help.

– Determine if the person needs rescue breathing or external cardiac compressions;

then take appropriate action.

- 7 -

4.4. Installing a XA-622H

Remove the XA-622H module from its protective packaging.

λ Avoiding Electrostatic Discharge

Before you install the XA-622H module, ground yourself by touching a

piece of metal to avoid electrostatic discharge (ESD). You should also

take the following precautions to prevent damage to the XA-622H

module:

Keep the XA-622H module in its antistatic-shielded bag until

you are ready to install it.

Handle the XA-622H module by its edges.

Ensure the connector is connected to above Model’s board tightly.

IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements,

the antenna used for this transmitter must be installed to provide a

separation distance of at least 20 cm from all persons and must not be

co-located or operating in conjunction with any other antenna or transmitter.