Installation Manual

Supported OS Identical to Atheros Latest Version
Security Identical to Atheros Latest Version
Physical Specification
Dimension 59.6mm(L) * 44.5mm(W) * 3.25mm(H)
Weight Less than 50g
Environment Specification
Temperature (Ambient) Humidity (non-condensing)
Operating
0 ~ 55
℃
90%
Storage
-20 ~ 80
℃
5 ~ 90%
4. Hardware Installation
The following sections in this chapter describe how to install XG-622H Module
4.1. Installation Overview
XG-622H wireless module is design for Access Point, Router, ATU-R, Printer Server
series, IP Camera series and Internet Video Server only.
4.2. Safety Recommendations
The safety guidelines are as follows:
λ Keep the board area clear and dust-free before, during, and after installation.
λ Keep tools away from walk areas where you and others could fall over them.
λ Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains, that
could get caught in the board.
λ
Wear safety glasses if you are working under any conditions that might be
hazardous to your eyes.
λ Do not perform any action that creates a potential hazard to people or makes
the equipment unsafe.
λ
Never attempt to lift an object that is too heavy for one person to handle.
4.3. Maintaining Safety with Electricity
Warning: Before working on a board or working near power supplies, unplug the power
cord on AC units; on DC units, disconnect the power at the circuit breaker
.
Follow these guidelines when working on equipment powered by electricity:
λ Do not work alone if potentially hazardous conditions exist anywhere in your
work space.
λ
Never assume that power is disconnected from a circuit; always check the
circuit.
extension cables, frayed power cords, and missing safety grounds.
λ
If an electrical accident occurs, proceed as follows:
– Use caution; do not become a victim yourself.
– Disconnect power from the system.
– If possible, send another person to get medical aid. Otherwise, assess the condition of
the victim and then call for help.
– Determine if the person needs rescue breathing or external cardiac compressions;
then take appropriate action.
- 7 -
4.4.
Installing a XG-622H
λ
Remove the XG-622H module from its protective packaging.
λ
Avoiding Electrostatic Discharge
Before you install the XG-622H module, ground yourself by touching a
piece of metal to avoid electrostatic discharge (ESD). You should also