User's Manual

ManualsBrandsZ Com ManualsElectronics802.11b/g Wireless mini-PCI Module

FCC Statement

Warning: Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user authority to operate the

equipment.

54Mbps IEEE802.11g Wireless Network Mini PCI Adapter

com plies w it h Part 15 of the FCC Rules.

Operat ion is subj ect t o t he following two conditions: (1) t his device m ay not cause harm ful

int erference, and ( 2) this device m ust accept any interference received, including interference t hat

m ay cause undesired operation.

The user’s m anual or instruct ion m anual for an intentional or unint ent ional radiat or shall caut ion t he

user that changes or m odifications not expressly approved by t he party responsible for com pliance

could void t he user’s aut hority t o operat e the equipm ent .

NOTE: This equipm ent has been test ed and found to com ply wit h t he lim it s for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable

protect ion against harm ful int erference in a residential installation. This equipm ent generat es, uses

and can radiate radio frequency energy and, if not installed and used in accordance with t he

inst ruct ions, m ay cause harm ful int erference to radio com m unicat ions.

However, there is no guarant ee t hat interference will not occur in a part icular inst allat ion. I f t his

equipm ent does cause harm ful interference to radio or television recept ion, which can be

det erm ined by t urning t he equipm ent off and on, the user is encouraged t o try to correct t he

int erference by one or m ore of t he following m easures:

Reorient or relocat e t he receiving antenna.

I ncrease the separat ion bet ween the equipm ent and receiver.

Connect t he equipm ent into an outlet on a circuit different from t hat to which the receiver is needed.

Consult t he dealer or an experienced radio/ TV t echnician for help.

CAUTION:

To com ply with FCC RF exposure com pliance requirem ents, a separation dist ance of at least 20 cm

m ust be m aintained bet ween t he antenna of t his device and all persons.

This Transm itter m ust not be co- locat ed or operating in conj unction with any ot her ant enna or

transm itter

This device is int ended only for OEM integrat ors under the following condit ions:

The antenna m ust be inst alled such that 20 cm is m aint ained bet ween t he ant enna and users. For

lapt op installat ions, t he antenna m ust be inst alled to ensure that t he proper spacing is m aintained

in the event the users places the device in their lap during use ( i.e. posit ioning of antennas m ust be

placed in t he upper portion of the LCD panel only t o ensure 20 cm will be m aint ained if t he user

places t he device in t heir lap for use) and The t ransm it t er m odule m ay not be co- locat ed wit h any

ot her t ransm it t er or ant enna. As long as the 2 conditions above are m et , furt her transm itter test ing

will not be required.

However, t he OEM integrat or is still responsible for t esting t heir end- product for any

addit ional com pliance requirem ents required wit h t his m odule installed (for exam ple,

digit al device em issions, PC peripheral requirem ents, etc.) .

IMPORTANT NOTE: I n t he event that these condit ions can not be m et ( for exam ple cert ain lapt op

configurations or co- locat ion wit h anot her t ransm it t er) , t hen the FCC aut horizat ion is no longer

considered valid and t he FCC I D can not be used on t he final

product. I n t hese circum st ances, t he OEM integrat or w ill be responsible for re- evaluat ing t he end

product ( including t he transm it t er) and obtaining a separat e FCC authorization.

End Product Labeling

This t ransm it t er m odule is aut horized only for use in devices where the ant enna m ay be installed

such t hat 20 cm m ay be m aintained between t he antenna and users ( for exam ple access points,

rout ers, wireless ASDL m odem s, cert ain lapt op configurat ions, and sim ilar equipm ent). The final

end product m ust be labeled in a visible area with t he following: "Contains

TX FCC I D: M4Y-0XG623

Summary of content (6 pages)

PAGE 1
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. 54Mbps IEEE802.11g Wireless Network Mini PCI Adapter com plies w it h Part 15 of t he FCC Rules.
PAGE 2
RF Exposure Manual Information That Must be Included The users m anual for end users m ust include t he following inform at ion in a prom inent locat ion " I MPORTANT NOTE: To com ply w it h FCC RF exposure com pliance requirem ent s, t he ant enna used for t his t ransm it t er m ust be inst alled t o provide a separat ion dist ance of at least 20 cm from all persons and m ust not be co- locat ed or operat ing in conj unct ion wit h any ot her ant enna or t ransm it t er.
PAGE 3
1. Introduction 54Mbps IEEE802.11g Wireless Network Mini PCI Adapter is t he perfect solut ion for your wireless net work applicat ions based on t he I EEE 802.11g st andard offering a dat a rat e of 54Mbps in a wireless LAN environm ent . XG-623 is designed for Access Point , Rout er, ATUR, Print er Server series, I P Cam era series and I nt ernet Video Server gives you wireless access t he web and net work resource wit hout t he wire.
PAGE 4
3. Specification Hardware Version: V1.0 Updated Date: 2005/8/11 Product Description IEEE 802.11g compliant 2.4 GHz WLAN miniPCI card Host Interface 32-bit miniPCI, Type III B Operating Voltage DC3.3V ± 5% Chipset Atheros AR2413 (Single chip) Power Consumption 11b 11g TX: ≦ TX: ≦ 550 mA 550 mA RX: ≦ RX: ≦ 450 mA 450 mA Radio Antenna Output Power two U.FL-R-SMT connectors IEEE 802.11b: 19dBm @ 1/2/5.5/11Mbps IEEE 802.11g: 17dBm @ 54Mbps Sensitivity IEEE 802.11g IEEE 802.
PAGE 5
Range Coverage IEEE 802.11g (Typical range in ♦ 54Mbps:≧ 60 meter open environment ♦ 48Mbps:≧70 meter with 0 dBi ♦ 36Mbps:≧80 meter Antenna) ♦ 24/18Mbps:≧ 120 meter ♦ 12/9/6Mbps:≧120 meter ♦ 11Mbps:≧80 meter Operating Frequency IEEE 802.11b ♦ ♦ ♦ ♦ 11Mbps:≧80 meter 5.5Mbps:≧120 meter 2Mbps:≧200 meter 1Mbps:≧300 meter IEEE 802.11b/g ISM Band ♦ USA(FCC): 2.412GHz ~ 2.462 GHz (CH1 ~ CH11) ♦ Europe(ETSI): 2.412 GHz ~ 2.472 GHz (CH1 ~ CH13) ♦ Japan(TELEC) : 2.412 GHz ~ 2.
PAGE 6
4. Hardware Installation The following sect ions in t his chapt er describe how t o inst all XG- 623 Module 4.1. Installation Overview XG-623 wireless module is design for Access Point, Router, ATU-R, Printer Server series, IP Camera series and Internet Video Server only. 4.2. Safety Recommendations The safety guidelines are as follows: λ Keep t he board area clear and dust - free before, during, and aft er inst allat ion. λ Keep t ools away from walk areas w here you and ot hers could fall over t hem .