Installation Instructions

. Freedom to Roam While staying Connected
. 54 Mbps High-Speed Transfer Rate
. Two UF-L Connectors for External Antenna
. Support Antenna diversity for Better Sensitivity
. Lower Power Consumption.
3. Specification
HOST INTERFACE
33MHz, 32-bit MiniPCI, Type III B (support TI VLYNQ bus)
RADIO
Chipset TI TNETW1130 ; Radia RC2422B & RC2326
Antenna Two UFL Connectors
USA (FCC) 11 Channels: 2.412GHz~2.462GHz
Europe (ETSI) 13 Channels : 2.412GHz~2.472GHz
Frequency
Japan (TELEC) 14 Channels : 2.412GHz~2.483GHz (14
th
ch only for
11b)
11g / 11g+ :OFDM (64QAM, 16QAM, QPSK, BPSK) Modulation
11b: DSSS (CCK, DQPSK, DBPSK) / 11b+: PBCC
11g / 11g+ : 64QAM 13dBm Typical Output Power
11b: DBPSK,DQPSK,CCK 17dBm Typical
11g / 11g+ : 54Mbps OFDM < -65dBm Receive Sensitivity
11b+: 22Mbps PBCC, <-80dBm
11g / 11g+ : mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps Data Rate
11b mode: 11, 5.5, 2, 1 Mbps
11g / 11g+ : TX:650mA ; RX: 500mA (max) Power Consumption
11b: TX: 650mA ; RX: 500mA (max)
Voltage 3.3V + 5%
PHYSICAL SPECIFICATIONS
Dimension 59.60mm(L)*44.45mm(W)*3.25mm(H)
Weight <15g
ENVIRONMENTAL SPECIFICATIONS
Temperature (Ambient) Humidity
(non-condensing)
Operating
0~55℃
90%
Storage
-10~65℃
5~95%
4. Hardware Installation
The following sections in this chapter describe how to install XG-650 Module
4.1. Installation Overview
XG-650 wireless module is design for Access Point and Router only.