User's Manual

-4-
Getting Started
This chapter describes the instructions that guide you through the proper installation of your
11Mbps Wireless LAN PC Card for the Windows XP/2000/NT/ME/98 operating systems.
The complete installation of the 11Mbps Wireless LAN PC Card consists of the following steps:
STEP 1: Insert your Wireless LAN PC Card into your notebook.
STEP 2: Install the corresponding driver and utility.
STEP 3: Set basic settings.
STEP 4: Finish Installation.
2-1 Before Installation
In addition to the items shipped with the client adapter, you will also need the following in order
to install the adapter:
1. A computer equipped with a Type II or Type III PCMCIA slot, and a PCMCIA card and
socket services compliant with revision 2.10 of the PCMCIA specification (or higher).
2. Windows XP/2000/NT/98/ME (with a Windows installation CD-ROM, diskettes for use
during installation)
3. Minimum 500 Kbytes free disk space for installing driver and utility program.
2-2 Insert the 11Mbps Wireless LAN PC Card
To install the 11Mbps Wireless LAN PC Card, please do the following:
1. Find an available Type II or Type III PCMCIA slot on your computer.
2. With the Wireless LAN PC Card’ s 68-pin connector facing the PCMCIA slot and its label
facing up, slide the PCMCIA adapter completely into the PCMCIA slot.