End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains TX FCC ID: M4Y-AG623C”.
RF Exposure Manual Information That Must be Included The users m anual for end users m ust include t he following inform at ion in a prom inent locat ion " I MPORTANT NOTE: To com ply w it h FCC RF exposure com pliance requirem ent s, t he ant enna used for t his t ransm it t er m ust be inst alled t o provide a separat ion dist ance of at least 20 cm from all persons and m ust not be co- locat ed or operat ing in conj unct ion wit h any ot her ant enna or t ransm it t er.
1. Introduction 54Mbps IEEE802.11a/b/g Wireless Network Mini PCI Adapter is t he perfect solut ion for your wireless net work applicat ions based on t he I EEE 802.11a/ b/ g st andard offering a dat a rat e of 54Mbps in a wireless LAN environm ent . AG-623C is designed for Access Point , Rout er, ATUR, Print er Server series, I P Cam era series and I nt ernet Video Server gives you wireless access t he web and net work resource wit hout t he wire.
3.Specification Product Description IEEE 802.11a/g compliant 5 & 2.4 GHz WLAN miniPCI card with Super A & Super G Host Interface 32-bit miniPCI, Operating Voltage DC3.3V ± 5% Chipset MAC / BB Processor Atheros AR5414 (Single chip) RF5824 RFMD PA Chip Power Consumption 11a TX: ≦ 550 mA 11b TX: ≦ 550 mA 11g TX: ≦ 550 mA Radio Antenna connector Primary : one U.FL connector Secondary :one U.FL connector IEEE802.11a Min. Band 1 5.15GHz ~ 5.25 GHz Band 3 5.725GHz ~ 5.
♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ 54 / 108 Mbps:≦-74dBm 48 Mbps:≦-75dBm 36 Mbps:≦-79dBm 24 Mbps:≦-83dBm 18 Mbps:≦-86dBm 12 Mbps:≦-88dBm 9 Mbps:≦-90dBm 6 Mbps:≦-91dBm IEEE 802.11b Sensitivity @ Packet Error Rate: 8% ♦ 11Mbps:≦-87dBm ♦ 5.5Mbps:≦-92dBm ♦ 2Mbps:≦-93dBm ♦ 1Mbps:≦-95dBm Modulation Range Coverage IEEE 802.11a (OFDM/DSSS) ♦ 48/54 Mbps (QAM-64) ♦ 24/36 Mbps (QAM-16) ♦ 12/18 Mbps (QPSK) ♦ 6/9 Mbps (BPSK) IEEE 802.
4. Hardware Installation The following sect ions in t his chapt er describe how t o inst all AG- 623C Module 4.1. Installation Overview AG-623C wireless module is design for Access Point, Router, ATU-R, Printer Server series, IP Camera series and Internet Video Server only. 4.2. Safety Recommendations The safety guidelines are as follows: λ Keep t he board area clear and dust - free before, during, and aft er inst allat ion. λ Keep t ools away from walk areas w here you and ot hers could fall over t hem .
