User's Manual

extension cables, frayed power cords, and missing safety
grounds.
λ If an electrical accident occurs, proceed as
follows:
– Use caution; do not become a victim yourself. –
Disconnect power from the system.
– If possible, send another person to get medical aid. Otherwise, assess the condition of the victim
and then call for help.
– Determine if the person needs rescue breathing or external cardiac compressions; then take
appropriate action.
3.4 Installing a AN-622
λ Remove the AN-622 module from its protective packaging.
λ Avoiding Electrostatic Discharge
Before you install the AN-622 module, ground yourself by touching a piece of metal to
avoid electrostatic discharge (ESD). You should also take the following precautions to
prevent damage to the AN-622 module:
λ Keep the AN-622 module in its antistatic-shielded bag until
you are ready to install it.
λ Handle the AN-622 module by its edges.
Ensure antenna connectors are connected to the Model’s board tightly.