User's Manual

11
Chapter 3 Setting Up Basic Wireless
Connectivity
The 802.11g SMB Wireless Access Point is shipped with default parameters, which will be
suitable for the typical infrastructure wireless LAN. Just simply install the Access Point,
power it on, and it is now ready to work. Nevertheless, you can still adjust configuration
settings depending on how you would like to manage your wireless network. The 802.11g
Wireless Access Point allows for configuration either via the Web-based Management, or
anywhere through a TCP/IP (Telnet) connection.
3-1 802.11g SMB Wireless Access Point Default Factory
Settings
When you first receive the 802.11g SMB Wireless Access Point, the default factory settings
will automatically be set, are shown following:
FEATURE
DEFAULT FACTORY SETTINGS
Password default
802.11g SMB Wireless Access Point Name
apxxxxxx where xxxxxx are the last six digits
of the AP’s MAC address
AP IP Address
192.168.1.1
AP Subnet Mask 255.255.255.0
SSID for 11g
My Network
11g RF Channel 1
Web Encryption Disable
Authentication Type Open System