User's Manual

15
Default Gateway: Specify the default gateway address for the 802.11g SMB Wireless Access
Point.
Wireless LAN Setup
The Wireless LAN Setup page lets you make changes to the wireless network settings. From
this window you can make changes to the wireless network name (SSID), Broadcast SSID,
Country, Operating Mode, Channel/Frequency, Data Rate, and Output Power.
SSID: The SSID is a unique ID used by Access Points and Stations to identify a wireless
LAN. Wireless clients associating to any Access Point must have the same ESSID. The
default ESSID is “My Network”. To change the SSID, type in the SSID you like to use. It is
case sensitive and must not exceed 32 characters.
Broadcast SSID: For security concern, you can choose not to broadcast your network’s SSID.
To turn off the broadcast of the SSID, click No check box next to “Broadcast SSID”. And
your Access Point will refuse the connection requests from whose are not aware the Network
ID. But certainly the Access Point can be easily connected well when you realize the Network
ID. The default setting is Yes.
Country / Region: Allow you to select country domain in case there is any chances that you
would use wireless network in other countries. There are a total of 17 countries for you to
select. They are Asia, Denmark, Europe, Finland, France, Germany, Ireland, Italy,
Netherlands, New Zealand, Norway, Puerto Rico, South America, Spain, Sweden,
Switzerland, United Kingdom.