User's Manual

16
Operating Mode: There are three different wireless modes to operate, “Auto (802.11g and
802.11b)”, “802.11b Only”, and “802.11g Only”. In Auto mode, the access point is
compatible with a mix of both 802.11g and 802.11b clients. You will see that the factory-set
default “Auto (802.11g and 802.11b)” will prove the most efficient. 802.11b-Only mode is
compatible with 802.11b clients only. This mode can be used only if you do not allow any
802.11g clients to access to the network. 802.11g-Only mode is compatible with 802.11g
clients only. This mode can be used only if you do not allow any 802.11b clients to access to
the network. To switch the mode, select the desired mode form the pull-down menu next to
“Operating Mode”.
Channel / Frequency: Select the appropriate channel/Frequency from the list provided to
correspond with your network settings.
Date Rate: The basic transfer rates should be set depending on the speed of your wireless
network. Specifies rate of data transmission. Select the desired rate from the drop-down menu
and choose “Best” to adapt the rate to the best available.
Output Power: Set the transmit signal strength of the access point. The options are full, 50%,
25%, 12.5%, and min. Decrease the transmit power if necessary. The default is Full.