User's Manual

19
Access Control
The Access Control allows you to restrict wireless access by MAC Address. This provides an
additional layer of security. Follow these steps:
1. In 802.11g SMB Wireless Access Point’s home page, choose the Access Control option
from the AP Setup.
2. If you want to enable filtering of computer by their MAC Address, click the check box
next to Enable Access Control.
3. Then, either select form the list of available wireless stations that your Access Point has
found or enter the MAC address for each client. After enter MAC Address, click Add
button in the MAC Address field to be managed.
4. Click Delete button if you wish to remove the MAC address from the list.
5. After you complete the setting, please click the Apply button for changes to take effect.
Note: If you want to check the Mass of stations currently using your network, please see the
Station List in the AP Status menu on page 30.