User's Manual

4-3 Management Setup

Password

Here allow you to change the Access Point’s password, do the following:

1. To change the current password, choose the Password option from the AP Setup menu in

the 802.11g SMB Wireless Access Point’s main page. Key in the default password

“default” in the Current Password filed.

2. Changing password for the Access Point is as easy as typing the password into the New

Password field. Then, type it again into the Retype new password field to confirm. Click

the Apply button to save the setting.

Note: After you change password, please take note of your new password. Otherwise, you

will not able to access the 802.11g SMB Wireless Access Point setup. If you forget the

password, you could restore the default password “default” by pressing the Reset button on

the back panel of your 802.11g SMB Wireless Access Point for at least 5 seconds.