User's Manual

Chapter 5 Troubleshooting

Why can’t I connect to Internet?

1. Make sure that such computer has a unique IP

address. If using DHCP through the AP, verify

that each computer is set to “Obtain an IP

Address automatically” and restart the computer.

2. Make sure that the AP’s Ethernet is on. If it is

not, try a different network cable.

Why can’t I access my 802.11g

Wireless LAN AP?

1. Make sure your AP is powered on.

2. Make sure that your computer has a compatible

IP address. Be sure that the IP address used on

your computer is set to the same as the AP. For

example, if the AP is set to 192.168.1.250, change

the IP address of your computer to 192.168.1.15

or another unique IP that corresponds to the

192.168.1.X subnet.

3. Use the Reset Button locates on the rear of the

AP to revert to the default settings.