User's Manual

For more information on using the Automatic Wireless Network Configuration please refer to

Windows XP Help file.

However, the WLAN Utility, which came with the Wireless LAN PCI Adapter, provides you more

tools to configure the 802.11g Wireless LAN PCI Adapter and to monitor the wireless connection.

For more information on installing and using the WLAN Utility, please refer to the following

sections “Installation of the Wireless LAN Utility” and “Usage of the WLAN Utility”.

Note: To use the WLAN Utility under Windows XP, you need to disable the

Automatic Wireless Network Configuration first. Steps are described as follows:

 Right click the Network Connections icon. Select Properties.

 Go to the Wireless Networks tab.

 Uncheck the “Use Windows to configure my wireless network settings” check

box and click the OK button (see the above picture).

Installation of the 802.11g Wireless LAN PCI Adapter under Windows 2000

1. Insert the 802.11g Wireless LAN PCI Adapter into the PCI slot on your notebook and start

Windows. Windows will auto-detect the Wireless LAN PCMCIA Card and a “Found New

Hard Wizard” window will show up. Click Continue to continue.

2. Select “Search for a suitable driver for my device (recommended)”. Insert the Product

CD-ROM into the appropriate drive. Click on Next to install the driver.

3. The windows will find “Wireless LAN 802.11g PCI Adapter (3V)”. Click on Next to

continue.

4. Click Finish to complete the installation

Warning

: You must choose

one way to configure Wireless

LAN PCI Adapter either of

using our WLAN Utility by un-

checking this check box or

using Windows XP Automatic

Wireless Network

Configuration first by

checking this check box.