User's Manual

FEB/25th/2002
5
3.2.1 Local Area Network settings:
Three selections are provided. If you plan to use any external DHCP server, select
Dynamic. Otherwise set the LAN address to Static. Under the Static IP, you have the
third choice to turn on the internal DHCP server. First enter the setting on the DHCP server
page and enable the default DHCP server. Once DHCP is enabled, you have to make sure
the IP address at the Static IP settings is in the range of the DHCP server in which the
default DHCP server is usually enabled.
3.2.2 Wireless settings
Your wireless settings will impact the coverage and the performance of your wireless LAN.
AP can be operated in three different bandwidth scenarios: high rate 54Mbps, low rate
11Mbps and a mix of both below 54M and 11Mbps. To deliver the throughput