User's Manual

-25-
Privacy Configuration consists of specifying Security and Certification, as explained in the
following:
Security Tab
In order to join a network, networks may require an encryption key for association. You must
configure the Authentication Mode and Encryption Mode for your keys in the Privacy section of
this menu.
For Authentication Mode:
Open: Requires NO authentication, since it allows any device to join a network without performing
any security check.
Shared: Requires that the station and the access point use the same WEP key to authenticate. This
basically means that WEP must be enabled and configured on both the access point and the client
with a same key, showed as below: