User's Manual

Chapter 2 Hardware Installation Page 5
Mechanical Description
Top panel of the Wireless Router:
The following table provides an overview of each LED activity:
Figure 2 The Wireless Broadband Router LED Panel
LED Definition Color Description
Steady Green Power enabled
Reset Green
On/Off: Press Reset button more then 6 seconds, the
LED will on and then off to indicate reset progress start.
On: An active device is connected to the 10/100MB
WAN port.
WAN Green
Blinking: The WAN port is sending or receiving data.
WLAN Green Blinking: Sending or receiving data via wireless link.
On: An active device is connected to the corresponding
10/100MB LAN port.
LAN 1-4 Green
Blinking: The corresponding LAN port is sending or
receiving data.
WPS LED Green
Wi-Fi Protected Setup compliant. Push WPS button for
3 seconds to enter WPS mode. When enter WPS PBC
mode, the LED will steady blink for 2 minutes. And if
wireless client that enable WPS associate, the LED
become bright.
Table 1 LED Description Table