User's Manual

Chapter 3 Setup Wizard Page 9
Step2. Configure the Time Zone Setting. Check the Enable NTP client update and select the Time
Zone and NTP server for your geographical location if need, and click Next.
Figure 6 Step2 – Time Zone Settings
Step3. Configure the LAN interface, you may change the IP address and Subnet Mask of the device
and click Next, or if not to change the IP address and Subnet Mask, click Next to the next step. The
default IP Address is http://192.168.1.254
.
Figure 7 Step3 – LAN Interface Settings
Step4. Configure the WAN interface, you may configure the WAN Access Type as Static IP, DHCP
Client, PPPoE, PPTP, and L2TP according to the WAN access type of your ISP that you connect,
and click Next.