User's Manual

Chapter 4 Advance Settings Page 16
Client Mode
You can configure the Wireless Broadband Router to Client Mode to be the wireless client of the
real world. When set the mode to Client Mode, you can configure the Network Type, SSID, and to
enable Broadcast SSID or disable.
Figure 13 Client Mode Settings
Enable Mac Clone (Single Ethernet Client)
Select the check box to enable this function when set to Client Mode. The wireless router will
clone the MAC address of the computer to be the Ethernet MAC of the Wireless Broadband
Router.
Enable Universal Repeater Mode (Acting as AP and client simultaneously) / SSID of
Extended Interface:
Select the check box to enable Universal Repeater feature, and input the extended SSID in the
field. (Refer to Chapter 6 to get more detail settings)