User's Manual

Chapter 4 Advance Settings Page 31
TCP/IP Settings
The configuration page provides 2 items for you to monitor and configure the Wireless Router: Wide
Area Network and Local Area Network.
Wide Area Network (WAN)
The status of the WAN port will be displayed as well as the connection type.
Local Area Network (LAN)
The IP address, DHCP server and DHCP IP arrange are displayed.
LAN Interface Setup:
This item allows you to manage the IP, and DHCP Server setting for the wireless router.
Figure 30 LAN Interface Settings
IP Address/Subnet Mask/Default Gateway:
Input the IP Address, Subnet Mask, and Default Gateway of the Wireless Broadband Router.
DHCP:
If you plan to use any external DHCP server, select Disable. Otherwise set the LAN address to
Static and select Server. If you set the DHCP server and configure your computers as
“automatic IP allocation” mode, the clients will automatically load the proper TCP/IP settings
from the AP when the computer is powered up. The default setting is “Server”.