User's Manual

Chapter 4 Advance Settings Page 45
MAC Filtering
The MAC filter allows you to configure the device to exclude devices from accessing the Wireless
Broadband Router. Every Ethernet device has a unique MAC address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
001970000002. You need to know the MAC address of the devices to configure this screen.
Figure 38 MAC Filter Settings
Select Enable MAC Filtering to activate this setting. Clear this check box to disable it.
Enter the MAC Address that you want to filter and fill in the comment, click Apply Changes to
save the settings. Click Reset to start configuring this part of the screen again.