XN-623 User manual
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
1. Introduction IEEE 802.11b/g/n WIRELESS miniPCI CARD is the perfect solution for your wireless network applications based on the IEEE 802.11g standard offering a data rate of 54Mbps in a wireless LAN environment. XN-623 is designed for Access Point, Router, ATUR, Printer Server series, IP Camera series and Internet Video Server gives you wireless access the web and network resource without the wire.
3. SPECIFICATION Hardware specification The Hardware specifications of the product are as below: Table2.1 Hardware specification Items Standard Chipset Antenna Antenna Configuration Host Interface Operating Voltage Power Consumption Normal Mode1 Output Power2 @ 25к Description IEEE 802.11b IEEE 802.11g IEEE 802.11n Draft 2.0 MAC/BBP AR9223 2 U.FL-R-SMT connectors 2T2R compliant 32-bit miniPCI, Type III A DC 3.3V ± 5% IEEE 802.11b IEEE 802.11g TX: Љ 550mA TX: Љ 550mA RX: Љ350mA RX: Љ 350mA IEEE 802.
Operating Frequency IEEE 802.11n (OFDM/DSSS) i QAM-64 i QAM-16 i QPSK i BPSK IEEE 802.11b/g ISM Band i USA(FCC)Κ 2.412GHz ~ 2.462 GHz (CH1 ~ CH11) i Europe(ETSI) Κ 2.412 GHz ~ 2.472 GHz (CH1 ~ CH13) i Japan(TELEC) Κ2.412 GHz ~ 2..472 GHz (CH1 ~ CH13) IEEE 802.11gn 20MHz Band i USA(FCC): 2.412GHz ~ 2.462 GHz i Europe(ETSI): 2.412 GHz ~ 2.472 GHz i Japan(TELEC) : 2.412 GHz ~ 2.472 GHz IEEE 802.11gn 40MHz Band i USA(FCC): 2.422GHz ~ 2.452 GHz(CH3 ~ CH9) i Europe(ETSI) : 2.422 GHz ~ 2.
Physical specification The Physical specifications of the product are as below: Items Housing Dimension Weight Physical specification Description 59.6mm(L) * 50.9mm(W) * 3.
4. Hardware Installation The following sections in this chapter describe how to install XN-623 Module 4.1. Installation Overview XN-623 wireless module is design for Access Point, Router, ATU-R, Printer Server series, IP Camera series and Internet Video Server only. 4.2. Safety Recommendations The safety guidelines are as follows: ӳʳ Keep the board area clear and dust-free before, during, and after installation. ӳʳ Keep tools away from walk areas where you and others could fall over them.
