Brochure

CHIMNEY & VENTING SOLUTIONS
Rain Cap
Wind-proof
Bird Resistant
Attractive
Prevents Entrance of
Moisture/Debris
Z-FLEX Insul-liner
Pre-insulated Chimney Liner for Category 1
Gas Heating Equipment & Gas Fireplaces
Z-FLEX
®
Liner Kits and Connectors
Insul-Liner™ is another “simple solution” from Z-FLEX
®
. The National Fuel
Gas Code (NFPA 54, ANSI Z223.1) recommends that liners be insulated in
certain situations.
A good rule of thumb is to use an insulated liner in exterior chimneys or when
a brick chimney has no clay liner at all. The insulation will keep the flue gases
warm to prevent condensation. Also refer to the equipment manufacturer’s
instructions for their recommendations.
Insul-Liner™ replaces B-Vent when relining a masonry chimney.
Insul-Liner™ is insulated at the factory and protected with an outer aluminum
jacket. This eliminates the time needed to insulate on the jobsite and prevents
damage to the insulation during installation. Simply remove from the box and
install.
• Z-FLEX
®
Aluminum Chimney Liner Kits come complete with everything you need to
quickly and easily install a professional venting system.
• Z-FLEX
®
liner is manufactured by using a dead soft aluminum strip which is spirally
wound and mechanically joined together forming an air-tight and leakproof
Triple-Lock™ seam.
Z-FLEX
®
’s specially designed ‘deep corrugations’ provide for greater flexibility and ease
of installation. The result is a clearly superior product offering incredible longevity.
Insul-Liner™ Kit Includes:
• Insulated Aluminum Liner
• Chimney Flashing
• Rain Cap
• Mortar Collar
• 3 Screws
Part No.: 2GIAKXX
Dia.: | Lgth.:
Dia.: 3”, 4”, 5”, 6”, 7”, 8”
Lengths: 15’
Insul-Liner™ Gas Fireplace Kit
Includes:
• Insulated Aluminum Liner
• Chimney Flashing
• Rain Cap
• Fireplace Connector
• 3 Screws
Part No.: 2GIAFKX
Dia.: | Lgth.:
Dia.: 4”, 5”, 6”
Lengths: 15’
Aluminium Chimney Gas Liner Kits
GAS APPLICATIONS
damage
during
install.
Insul-
L
iner™ Kit Includes:
Insul-
L
iner™ Gas
Fireplace Kit
Aluminium Chimney System
5/6
Liner Coupling
Part No.: 2CNNTRG
Dia.:
Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”
Custom sizes available.
Used to attach two lengths
of vent.
Fireplace
Connector
Gas Fireplace Kits only.
Part No.: 2ZSCPRP
Dia.:
Universal
B-Vent Connector
Part No.: 2CNNBFC
Dia.:
Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”
Connects any B-Vent to
Z-FLEX
®
liner.
Nose Cone
Part No.: 2NCXXXX
Dia.:
Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”
Additional
Length Aluminum
2-Ply Liner
Part No.: 2GAXXXX
Dia.: | Lgth.:
Available in multiples of 5’
to 50’.
Galvanized “Y”
Part No.: 2GAYXXX
Dia.: | Lgth.:
Dia.: 3”, 4”, 5”, 6”, 7”, 8”
Connects two vent connectors
to common vent.
B-Vent Connector
Galvanized
Y
Galvanized
Y
Aluminum Liner Kit
Includes:
2-Ply Aluminum Liner
Chimney Flashing
Rain Cap
Mortar Collar
3 Screws
Part No.: 2GACKIT
Dia.: | Lgth.:
Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”
Lengths: 15’ - 50’
Gas Fireplace Kit Includes:
2-Ply Aluminum Liner
Chimney Flashing
Rain Cap
Fireplace Adapter
(Single Appliance)
• 3 Screws
Part No.: 2GAFKXX
Dia.: | Lgth.:
Dia.: 3”, 4”, 5”, 6”, 7”, 8”, 10”
Lengths: 15’ - 50’
Z-FLEX
®
chimney liners are listed with
Underwriters Laboratories, File MH 13681
Special Characteristics
Patented Triple-Lock™
Mechanical Joint
Manufactured from Dead
Soft Pure Aluminum
Significant Advantages
• Greater Flexibility
• Exceptional Strength
• Corrosion Resistant
• Air-tight and Leakproof
• Vibration Deadening Properties
• Light Weight
• Highly Puncture Resistant
• High Pressure Rating
Flashing
16”x 16” Plate
• Galvanized Material
• Strong
Mortar Collar
• Simple to Install
• Clean Look
• Corrosion-resistant
Material
Flexible
Aluminium
Liner
BIRD PROOF
RAINCAP
When to Z-FLEX
®
a Chimney
(from National Gas Code)
• When a masonry chimney has no liner at all
• When damage to existing chimney lining is evident
• When retrofit appliance has fan-assisted combustion and is vented alone
• When additional or replacement equipment is installed or an appliance is
converted to gas from another fuel
• When the existing chimney is oversized relative to heating requirement