Z-VENT™ Table of Contents Commercial Systems Z-Vent Single Wall Z-Vent Double Wall Pipe 1 Double Wall Pipe 17 Boot Tee 2 Double Wall Boot Tee 18 Tee 2 Double Wall Tee 18 Tee Cap with Drain 3 Double Wall Tee Cap 19 Adjustable Pipe 3 Double Tee Cap with Drain 19 Vertical Drain Pipe 4 Single Wall to Double Wall Adapter 20 Pipe with Inspection Port 4 Double Wall to Single Wall Adapter 20 Low Resistance Rain Cap 5 Double Wall Rain Cap 21 Rain Cap 5 Low Resistance Double Wall
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Available in diameters 3in to 24in and standard lengths up to 10ft (3in and 4in diameter only). Pipe can be cut to length. The female end of each Z-VENT™ component incorporates a Double Fail Safe™ self sealing gasket. Examine all components to ensure that gasket integrity has remained during shipping. Gaskets must be in proper position or flue gases could leak resulting in carbon monoxide poisoning.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Boot Tee A B C D Part Number Description 3 11.00 7.50 4.88 2SVSTBT03 Z-Vent Boot Tee 3 in 4 12.00 8.00 5.25 2SVSTBT04 Z-Vent Boot Tee 4 in 5 14.00 9.50 7.00 2SVSTBT05 Z-Vent Boot Tee 5 in 6 17.00 11.25 10.00 2SVSTBT06 Z-Vent Boot Tee 6 in 7 13.63 12.50 11.25 2SVSTBT07 Z-Vent Boot Tee 7 in 8 20.34 13.75 12.50 2SVSTBT08 Z-Vent Boot Tee 8 in 9 22.30 15.00 13.75 2SVSTBT09 Z-Vent Boot Tee 9 in 10 24.44 16.25 15.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Tee Cap with Drain A tee cap with drain is required at the bottom of a vertical stack. High temperature silicone tubing is available separately.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Vertical Drain Pipe Used to drain condensate from the Vent system. High temperature Drain Tube kit sold separately. A B Part Number Description 3 5.75 2SVEVDP03 Vertical Drain Pipe 3" 4 5.75 2SVEVDP04 Vertical Drain Pipe 4" 5 5.75 2SVEVDP05 Vertical Drain Pipe 5" DRAIN FITTING B ØA Pipe with Inspection Port Vent length with test port allows easy access for flue gas analysis. TEST PORT B A Page 4 A B Part Number Description 3 3.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Low Resistance Rain Cap A B C Part Number Description 5 7.00 11.00 2SVSRC05 Low Resistance Rain Cap 5in 6 7.00 12.75 2SVSRC06 Low Resistance Rain Cap 6in 7 7.30 14.00 2SVSRC07 Low Resistance Rain Cap 7in 8 7.50 15.00 2SVSRC08 Low Resistance Rain Cap 8in 9 8.00 18.50 2SVSRC09 Low Resistance Rain Cap 9in 10 8.00 18.50 2SVSRC10 Low Resistance Rain Cap 10in 12 9.00 22.12 2SVSRC12 Low Resistance Rain Cap 12in 14 10.00 25.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Exit Cone A B C Part Number Description 6 4.87 9.25 2SVSXITC06 Z-Vent Exit Cone 6 in 7 5.69 9.88 2SVSXITC07 Z-Vent Exit Cone 7 in 8 6.50 10.40 2SVSXITC08 Z-Vent Exit Cone 8 in 9 7.31 10.88 2SVSXITC09 Z-Vent Exit Cone 9 in 10 8.125 11.25 2SVSXITC10 Z-Vent Exit Cone 10 in 12 9.88 12.75 2SVSXITC12 Z-Vent Exit Cone 12 in 14 11.75 13.63 2SVSXITC14 Z-Vent Exit Cone 14 in 16 13.25 14.63 2SVSXITC16 Z-Vent Exit Cone 16 in 18 14.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent 15° Elbows A B C Part Number Description 3 2.45 4.20 2SVEEWCF0315 Z-Vent Elbow 15° X 3 in 4 2.51 4.26 2SVEEWCF0415 Z-Vent Elbow 15° X 4 in 5 2.58 4.33 2SVEEWC0515 Z-Vent Elbow 15° X 5 in 6 2.64 4.39 2SVEE0615 Z-Vent Elbow 15° X 6 in 7 2.71 4.46 2SVEE0715 Z-Vent Elbow 15° X 7 in 8 2.78 4.53 2SVEE0815 Z-Vent Elbow 15° X 8 in 9 2.84 4.59 2SVEE0915 Z-Vent Elbow 15° X 9 in 10 2.91 4.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent 45° Elbows A B C Part Number Description 3 1.62 3.37 2SVEEWCF0345 Z-Vent Elbow 45° X 3 in 4 1.83 3.58 2SVEEWCF0445 Z-Vent Elbow 45° X 4 in 5 4.16 5.91 2SVEEWC0545 Z-Vent Elbow 45° X 5 in 6 4.37 6.12 2SVEE0645 Z-Vent Elbow 45° X 6 in 7 4.58 6.33 2SVEE0745 Z-Vent Elbow 45° X 7 in 8 4.79 6.54 2SVEE0845 Z-Vent Elbow 45° X 8 in 9 5.00 6.75 2SVEE0945 Z-Vent Elbow 45° X 9 in 10 5.20 6.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent 45° Termination Elbow A Part Number Description 3 2SVSTEX0345 Z-Vent Termination Elbow 3 in X 45° 4 2SVSTEX0445 Z-Vent Termination Elbow 4 in X 45° 45° ØA 4.0 90° Termination Elbow A Part Number Description 3 2SVSTEX0390 Z-Vent Termination Elbow 3 in X 90° 4 2SVSTEX0490 Z-Vent Termination Elbow 4 in X 90° ØA 90° 6.000 5.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Increaser B 4 5 5 6 8 6 7 8 9 6 7 8 9 7 8 9 10 8 9 10 12 10 12 14 10 12 12 14 16 14 16 18 16 18 20 18 20 22 20 22 24 22 24 24 Page 10 C 7.00 8.15 7.00 8.15 10.30 7.00 8.15 9.20 10.30 7.00 8.15 9.20 10.30 7.00 8.15 9.20 10.30 7.00 8.15 9.20 11.36 8.15 10.30 12.43 7.00 9.20 8.15 11.30 13.43 9.15 11.30 13.43 9.15 11.30 13.43 9.15 11.30 13.43 9.15 11.30 13.43 9.15 11.30 9.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Eccentric Increaser A B C D Part Number Description 5 5 5 6 6 6 6 6 7 7 7 8 8 8 9 9 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 22 6 7 8 7 8 9 10 12 8 10 12 10 12 14 10 12 12 14 16 14 16 18 16 18 20 18 20 22 20 22 24 22 24 24 12.00 12.00 14.00 12.00 12.00 14.00 14.00 14.00 12.00 12.00 14.00 12.00 12.00 14.00 12.00 12.00 12.00 13.00 14.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 0.50 1.00 2.00 0.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Flashing Flat A B C Part Number Description 3 12 12.50 2SVSSCF03 Z-Vent Flashing Flat 3 in 4 12 14.00 2SVSSCF04 Z-Vent Flashing Flat 4 in 5 12 16.00 2SVSF05 Z-Vent Flashing Flat 5 in 6 12 17.00 2SVSF06 Z-Vent Flashing Flat 6 in 7 12 18.50 2SVSF07 Z-Vent Flashing Flat 7 in 8 12 22.00 2SVSF08 Z-Vent Flashing Flat 8 in 9 12 22.00 2SVSF09 Z-Vent Flashing Flat 9 in 10 12 23.00 2SVSF10 Z-Vent Flashing Flat 10 in 12 12 26.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Wall Thimble A B C Part Number Description 3 5.00 10.00 2SVSWTF03 Z-Vent Wall Thimble 3 in 4 6.00 10.00 2SVSWTF04 Z-Vent Wall Thimble 4 in 5 7.00 12.00 2SVSWTF05 Z-Vent Wall Thimble 5 in 6 18.00 24.00 2SVSWTF06 Z-Vent Wall Thimble 6 in 7 19.00 24.00 2SVSWTF07 Z-Vent Wall Thimble 7 in 8 20.00 26.00 2SVSWTF08 Z-Vent Wall Thimble 8 in 9 21.00 26.00 2SVSWT09 Z-Vent Wall Thimble 9 in 10 22.00 28.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Guy Band A B Part Number Description 3 3.00 2SVSGB03 Z-Vent Guy Band 3 in 4 3.00 2SVSGB04 Z-Vent Guy Band 4 in 5 3.00 2SVSGB05 Z-Vent Guy Band 5 in 6 3.00 2SVSGB06 Z-Vent Guy Band 6 in 7 3.00 2SVSGB07 Z-Vent Guy Band 7 in 8 3.00 2SVSGB08 Z-Vent Guy Band 8 in 9 3.00 2SVSGB09 Z-Vent Guy Band 9 in 10 3.00 2SVSGB10 Z-Vent Guy Band 10 in 12 3.00 2SVSGB12 Z-Vent Guy Band 12 in 14 3.00 2SVSGB14 Z-Vent Guy Band 14 in 16 3.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Vent Support A B C Part Number Description 3 2.5 3 2SVSWS03 Z-Vent Single Wall Support 3in 4 3.0 3 2SVSWS04 Z-Vent Single Wall Support 4in 5 4.5 3 2SVSWS05 Z-Vent Single Wall Support 5in 6 5 3 2SVSWS06 Z-Vent Single Wall Support 6in 7 5.
Z-VENT™ Single Wall AL29-4C® Special Gas Vent Adapter 6in (Double Female) A B C Part Number 3 2.00 5.50 2SVSNA03.5 Z-Vent Appliance Adaptor 3 in 4 2.00 5.50 2SVSNA04.5 Z-Vent Appliance Adaptor 4 in 5 2.00 5.50 2SVSA05 Z-Vent Appliance Adaptor 5 in 6 2.00 5.50 2SVSA06 Z-Vent Appliance Adaptor 6 in 7 2.00 5.50 2SVSA07 Z-Vent Appliance Adaptor 7 in 8 2.00 5.50 2SVSA08 Z-Vent Appliance Adaptor 8 in 9 2.00 5.50 2SVSA09 Z-Vent Appliance Adaptor 9 in 10 2.00 5.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Pipe B C Available in diameters 3in to 24in. The female end of each Z-VENT™ component incorporates a Double Fail Safe™ self sealing gasket. Examine all components to ensure that gasket integrity has remained during shipping. Gaskets must be in proper position or flue gases could leak resulting in carbon monoxide poisoning. The installation shall be in accordance with the manufacturer’s installation instructions.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Boot Tee A B C D Part Number Description 3 11.00 7.50 4.88 2SVDTBT03 Z-Vent DW Boot Tee 3 in 4 12.00 8.00 5.25 2SVDTBT04 Z-Vent DW Boot Tee 4 in 5 14.00 9.50 7.00 2SVDTBT05 Z-Vent DW Boot Tee 5 in 6 17.00 11.25 10.00 2SVDTBT06 Z-Vent DW Boot Tee 6 in 7 13.63 12.50 11.25 2SVDTBT07 Z-Vent DW Boot Tee 7 in 8 20.34 13.75 12.50 2SVDTBT08 Z-Vent DW Boot Tee 8 in 9 22.30 15.00 13.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Tee Cap A B C Part Number Description 5 2 4 2SVDTC05 Z-Vent DW Tee Cap 5 in 6 2 4 2SVDTC06 Z-Vent DW Tee Cap 6 in 7 2 4 2SVDTC07 Z-Vent DW Tee Cap 7 in 8 2 4 2SVDTC08 Z-Vent DW Tee Cap 8 in 9 2 4 2SVDTC09 Z-Vent DW Tee Cap 9 in 10 2 4 2SVDTC10 Z-Vent DW Tee Cap 10 in 12 2 4 2SVDTC12 Z-Vent DW Tee Cap 12 in 14 3 5 2SVDTC14 Z-Vent DW Tee Cap 14 in 16 3 5 2SVDTC16 Z-Vent DW Tee Cap 16 in 18 3 5 2SVDT
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Damper Pipe A Part Number Description 6 2SVDIDS06 Z-vent D/W Damper Pipe 6 in 7 2SVDIDS07 Z-vent D/W Damper Pipe 7 in 8 2SVDIDS08 Z-vent D/W Damper Pipe 8 in 9 2SVDIDS09 Z-vent D/W Damper Pipe 9 in 10 2SVDIDS10 Z-vent D/W Damper Pipe 10 in 12 2SVDIDS12 Z-vent D/W Damper Pipe 12 in Used to adjust flue gas flow in positive or negative pressure vent systems.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Single Wall to Double Wall Adapter A B Part Number Description 3 5.75 2SVDSA03 Z-Vent SW to DW Adaptor 3in 4 5.75 2SVDSA04 Z-Vent SW to DW Adaptor 4in 5 5.75 2SVDSA05 Z-Vent SW to DW Adaptor 5in 6 5.75 2SVDSS06 Z-Vent SW to DW Adaptor 6 in 7 5.75 2SVDSA07 Z-Vent SW to DW Adaptor 7in 8 5.75 2SVDSA08 Z-Vent SW to DW Adaptor 8in 9 5.75 2SVDSA09 Z-Vent SW to DW Adaptor 9in 10 5.75 2SVDSA10 Z-Vent SW to DW Adaptor 10in 12 5.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Rain Cap A B C 3 6.00 11.00 2SVDRCF03 DW Rain Cap w/wind band 3in 4 6.00 12.75 2SVDRCF04 DW Rain Cap w/ wind band 4in 5 7.00 11.00 2SVDRCX05 DW Rain Cap w/wind band 5in 6 7.00 12.75 2SVDRCX06 DW Rain Cap w/wind band 6in 7 7.30 14.00 2SVDRCX07 DW Rain Cap w/wind band 7in 8 7.50 15.00 2SVDRCX08 DW Rain Cap w/wind band 8in 9 8.00 18.50 2SVDRCX09 DW Rain Cap w/wind band 9in 10 8.00 18.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent 15° Double Wall Elbow A B C Part No 3 2.45 4.20 2SVDEWCF0315 Z-Vent DW Elbow 15° X 3 in 4 2.51 4.26 2SVDEWCF0415 Z-Vent DW Elbow 15° X 4 in 5 2.58 4.33 2SVDEWC0515 Z-Vent DW Elbow 15° X 5 in 6 2.64 4.39 2SVDE0615 Z-Vent DW Elbow 15° X 6 in 7 2.71 4.46 2SVDE0715 Z-Vent DW Elbow 15° X 7 in 8 2.78 4.53 2SVDE0815 Z-Vent DW Elbow 15° X 8 in 9 2.84 4.59 2SVDE0915 Z-Vent DW Elbow 15° X 9 in 10 2.91 4.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent 45° Double Wall Elbow A B C Part Number Description 3 1.62 3.37 2SVDE0345 Z-Vent DW Elbow 45° X 3 in 4 1.83 3.58 2SVDE0445 Z-Vent DW Elbow 45° X 4 in 5 4.16 5.91 2SVDE0545 Z-Vent DW Elbow 45° X 5 in 6 4.37 6.12 2SVDE0645 Z-Vent DW Elbow 45° X 6 in 7 4.58 6.33 2SVDE0745 Z-Vent DW Elbow 45° X 7 in 8 4.79 6.54 2SVDE0845 Z-Vent DW Elbow 45° X 8 in 9 5.00 6.75 2SVDE0945 Z-Vent DW Elbow 45° X 9 in 10 5.20 6.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Eccentric Increaser A B C D Part Number Description 5 6 12.00 0.50 2SVDIE0506 Z-Vent DW Eccentric Increaser 5 to 6 in 5 7 12.00 1.00 2SVDIE0507 Z-Vent DW Eccentric Increaser 5 to 7in 5 8 14.00 2.00 2SVDIE0508 Z-Vent DW Eccentric Increaser 5 to 8 in 6 7 12.00 0.50 2SVDIE0607 Z-Vent DW Eccentric Increaser 6 to 7 in 6 8 12.00 1.00 2SVDIE0608 Z-Vent DW Eccentric Increaser 6 to 8in 6 9 14.00 1.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Increaser A B C 3 3 4 4 4 5 5 5 5 5 5 5 5 6 6 6 6 7 7 7 7 8 8 8 9 9 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 22 4 5 5 6 8 6 7 8 9 6 7 8 9 7 8 9 10 8 9 10 12 10 12 14 10 12 12 14 16 14 16 18 16 18 20 18 20 22 20 22 24 22 24 24 7.00 8.15 7.00 8.15 10.30 7.00 8.15 9.20 10.30 7.00 8.15 9.20 10.30 7.00 8.15 9.20 10.30 7.00 8.15 9.20 11.36 8.15 10.30 12.43 7.00 9.20 8.15 11.30 13.43 9.15 11.30 13.43 9.15 11.30 13.43 9.15 11.30 13.43 9.15 11.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Base Support A B Part Number Description 5 10.00 2SVDBS03 Z-Vent DW Base Support 3 in 6 11.00 2SVDBS04 Z-Vent DW Base Support 4 in 7 12.00 2SVDBS05 Z-Vent DW Base Support 5 in 8 13.00 2SVDBS06 Z-Vent DW Base Support 6 in 9 14.00 2SVDBS07 Z-Vent DW Base Support 7 in 10 15.00 2SVDBS08 Z-Vent DW Base Support 8 in 12 17.00 2SVDBS09 Z-Vent DW Base Support 10 in 14 19.00 2SVDBS10 Z-Vent DW Base Support 12 in 16 21.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Storm Collar / Top Support A B Part ID Description 5 9.00 2SVDLS03 Z-Vent DW Storm Collar 3 in 6 10.00 2SVDLS04 Z-Vent DW Storm Collar 4 in 7 11.00 2SVDLS05 Z-Vent DW Storm Collar 5 in 8 12.00 2SVDLS06 Z-Vent DW Storm Collar 6 in 9 13.00 2SVDLS07 Z-Vent DW Storm Collar 7 in 10 14.00 2SVDLS08 Z-Vent DW Storm Collar 8 in 11 15.00 2SVDLS09 Z-Vent DW Storm Collar 9 in 12 16.
Z-VENT™ Double Wall AL29-4C® Special Gas Vent Double Wall Adjustable Length A B C Part Number Description 3 9.00 15.50 2SVDPA03 Z-vent D/W Adjustable Pipe 3 in 4 9.00 15.50 2SVDPA04 Z-vent D/W Adjustable Pipe 4 in 5 9.00 15.50 2SVDPA05 Z-vent D/W Adjustable Pipe 5 in 6 9.00 15.50 2SVDPA06 Z-vent D/W Adjustable Pipe 6 in 7 9.00 15.50 2SVDPA07 Z-vent D/W Adjustable Pipe 7 in 8 9.00 15.50 2SVDPA08 Z-vent D/W Adjustable Pipe 8 in 9 9.00 15.
Z-VENT Warranty The installation must conform to the requirements of the appliance manufacturers’ instructions, The National Fuel Gas Code and local codes and regulations. Z-FLEX® LIMITED LIFETIME WARRANTY Z-FLEX® (“Seller”) extends the following LIMITED WARRANTY for Z-VENT™ (the “Z-VENT™”): Seller warrants that at the time of purchase, the Z-VENT™ will be free of manufacturers defects in material and/or workmanship.
® 20 Commerce Park North Bedford, New Hampshire 03110-6911 tel: 603.669.5136 fax: 603.669.0309 452 Attwell Drive Etobicoke, ON M9W 5C3 tel: 416.679.0045 fax: 416.679.0051 www.z-flex.com email sales@z-flex.