Advanced Venting Solutions Z-DENS Polypropylene Vent Systems for High Efficiency Condensing Appliances Catalogue 2015 Z-FLEX ® Single Wall Rigid Flexible Liner Cascade Concentric
Catalogue Z-DENS 2” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCPVC2 Z-DENS Adaptor 2” CPVC/PVC Coupling to 2” (60 mm) Z-DENS - Stainless Steel 2ZDCPVCG2 Z-DENS Adaptor - Appliance with Gasket & Clamp - 2” CPVC/PVC to 2" (60 mm) Z-DENS - Stainless Steel 2ZDTA42 Z-DENS Adaptor - Takagi T-H3-DV/140-540 to 2” (60 mm) Z-DENS - Stainless Steel 2ZDP212 Z-DENS Pipe 2" (60 mm) L = 12" White 2ZDP212UV Z-DENS Pipe 2" (60 mm) L = 12"
Catalogue Z-DENS 2” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image L H1 H2 Part ID Description 2ZDCD2 Z-DENS Condensate Drain 2" (60 mm) L= 5.9" (150 mm)Horizontal/ Vertical - White 2ZDCT Z-DENS Condensate Trap 2ZDI23 Z-DENS Increaser 2" to 3" (60 to 80 mm) Eccentric - White 2ZDR32 Z-DENS Reducer 3” to 2” (80 to 60 mm) L = 5.
Catalogue Z-DENS 2” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDACLC2224 Z-DENS Adaptor Collinear to Concentric 2"-2" to 2"/4" (60 mm to 60/100 mm) 2ZDCTAC4 Z-DENS Concentric Termination Air Cap 4" (100 mm) 2ZDFF2 Z-DENS Flat Flashing 2”/4” (60/100 mm) or 3”/5” (80 /125 mm), 0°, H = 4” (100 mm) 2ZDAF2 Z-DENS Adjustable Flashing (Small) 2”/4” (60/100 mm) or 3”/5” (80/125 mm), 5° - 25° 2ZDAFM2 Z-DENS Adjustable Flashing Mediu
Catalogue Z-DENS 2” Flexible Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDFK225 Z-DENS Flexible Kit - Chimney 2” (60 mm) x 25 ft (7.6 m) 2ZDFK235 Z-DENS Flexible Kit - Chimney 2” (60 mm) x 35 ft (10.
Catalogue Z-DENS 2” Flexible Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZD5BV2 Z-DENS Cap 5” B-Vent to 2“ PP or PVC/CPVC 2ZDCPS2 Z-DENS Flexible Ceiling Plate 2" (60 mm) (B2) 2ZDCPC2 Z-DENS Flexible Ceiling Plate to Concentric 2" to 2"/4" ( 60 to 60/100 mm) Ventilated Chimney Air (C9x) 2ZDCPCT2 Z-DENS Flexible Ceiling Plate to Concentric Telescopic 2" to 2”/4” (60 to 60/100 mm) Ventilated Chimney Air (C9x) 2ZDFC2 Z-DENS Flexible Coupling 2" (
Catalogue Z-DENS 3” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCPVC3 Z-DENS Adaptor 3”CPVC/PVC Coupling to 3” (80 mm) Z-DENS - Stainless Steel 2ZDCPVCG3 Z-DENS Adaptor - Appliance with Gasket & Clamp 3” CPVC/PVC to 3” (80 mm) Z-DENS - Stainless Steel 2ZDCPVCG3L Z-DENS Adaptor - Appliance with Gasket & Clamp 3" CPVC/PVC to 3" (80 mm) Z-DENS L = 15.
Catalogue Z-DENS 3” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCD3 Z-DENS Condensate Drain 3" (80 mm) L = 6.3” (160 mm)Horizontal/ Vertical White 2ZDCT Z-DENS Condensate Trap 2ZDI34 Z-DENS Increaser 3” to 4” (80 to 110 mm) L = 5.
Catalogue Z-DENS 3” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDACLC3335 Z-DENS Adaptor Collinear to Concentric 3"- 3"to 3"/5" (8 mm to 80/125 mm) 2ZDCTAC5 Z-DENS Concentric Termination Air Cap 5" (125 mm) 2ZDFF2 Z-DENS Flat Flashing 2”/4” (60/100 mm) or 3”/5” (80/125 mm) 0°, H = 4” (100 mm) 2ZDAF2 Z-DENS Adjustable Flashing (Small) 2”/4” (60/100 mm) or 3”/5” (80/125 mm), 5° - 25° 2ZDAFM2 Z-DENS Adjustable Flashing Medium 2
Catalogue Z-DENS 3” Flexible Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDFK325 Z-DENS Flexible Kit - Chimney 3” (80 mm) x 25 ft (7.6 m) 2ZDFK335 Z-DENS Flexible Kit - Chimney 3” (80 mm) x 35 ft (10.
Catalogue Z-DENS 3” Flexible Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDRCC3 Z-DENS Round Chimney Cover 3” (80 mm) to 5”or 6” B-Vent 2ZD6BV3 Z-DENS Cap 6” B-Vent to 3”PP or PVC/CPVC 2ZDCPS3 Z-DENS Flexible Ceiling Plate 3" (80 mm) (B2) 2ZDCPC3 Z-DENS Flexible Ceiling Plate to Concentric 3" to 3"/5" (80 to 80/125 mm) - Ventilated Chimney Air (C9x) 2ZDCPCT3 Z-DENS Flexible Ceiling Plate Concentric Telescopic 3” to 3"/5" (80 to 80/125 mm) - Ve
Catalogue Z-DENS 4” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCPVC4 Z-DENS Adaptor 4” CPVC/PVC Coupling to 4” (110 mm) Z-DENS Stainless Steel 2ZDCPVCG4 Z-DENS Adaptor Appliance with Gasket & Clamp - 4” CPVC/PVC to 4” (110 mm) Z-DENS - Stainless Steel 2ZDCPVCC4 Z-DENS Adaptor - Appliance with Clamp 3" CPVC/PVC to 3" (80 mm) Z-DENS - Stainless Steel 2ZDCPVCF4 Z-DENS Adaptor 4" CPVC/PVC Pipe to 4" (110 mm) Z-DENS - Stainless S
Catalogue Z-DENS 4” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCT Z-DENS Condensate Trap 2ZDI44 Z-DENS Increaser 4" (100 to 110 mm) L = 6.
Catalogue Z-DENS 4” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCTAC6 Z-DENS Concentric Termination Air Cap 6" (160 mm) 2ZDFF4 Z-DENS Flat Flashing 4"/6" (110/160 mm) or 6" (160 mm), 0°, H = 6" (150 mm) 2ZDAF4 Z-DENS Adjustable Flashing (Small) 4"/6" (110/160 mm), 5° - 25° 2ZDAFM4 Z-DENS Adjustable Flashing Medium 4"/6" (110/160 mm) 25° - 45° 2ZDLC4 Z-DENS Locking Clamp 4" (110 mm) 2ZDFB4 Z-DENS Fixing Bracket/Support Cla
Catalogue Z-DENS 4” Flexible Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDFK425 Z-DENS Flexible Kit Chimney 4” (110 mm) x 25 ft (7.6 m) Includes Wall Plate and Flexible Connections 2ZDFK435 Z-DENS Flexible Kit Chimney 4” (110 mm) x 35ft (10.
Catalogue Z-DENS 4” Flexible Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDFRA4 Z-DENS Flexible to Rigid (Male) Adaptor 4" (110 mm) 2ZDFIT4 Z-DENS Flexible Installation Tool 4" (110 mm) 2ZDGL Z-DENS Gasket Lubricant 2ZDFG4 Z-DENS Flexible Gasket 4” (110 mm) Replacement - Red/Brown FKM (Viton®) Revision 11.25.2015 Details subject to change without notice. Dimensions are nominal.
Catalogue Z-DENS 5” Single Wall Rigid - SPECIAL ORDER Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Image Description 2ZDP524 Z-DENS Pipe 5" (125 mm) L = 24" UV-Grey 2ZDP536 Z-DENS Pipe 5" (125 mm) L = 36" UV-Grey 2ZDP572 2ZDTP5 2ZDE545 Z-DENS Reducer 5” to 4” (125 to 110 mm) 2ZDES5 Z-DENS End Screen 5” (125 mm) Stainless Steel 2ZDTT5 Z-DENS Termination Tee with Screen 5” (125 mm) Stainless Steel 2ZDCC5 Z-DENS Chimney Cover 5" (125 mm) 2ZDRT5 Z-DENS R
Catalogue Z-DENS 6” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID 2ZDCPVC6 Description Image Z-DENS Adaptor 6” CPVC/ PVC Coupling to 6" (160 mm) Z-DENS - Stainless Steel Part ID 2ZDE687 Z-DENS Elbow 6" (160 mm) 87° UV-Grey 2ZDCD6H Z-DENS Condensate Drain 6" (160 mm) L = 9" (230 mm) Horizontal 2ZDCT Z-DENS Condensate Trap 2ZDA6 Z-DENS Adaptor 6” (150 mm to 160 mm) L = 7.3" (185 mm) 2ZDI68 Z-DENS Increaser 6" to 8" (160 to 200 mm) L = 12.
Catalogue Z-DENS 6” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID H1 H2 Description 2ZDRT6 Z-DENS Roof Termination 6" (160 mm) H1 = 35.
Catalogue Z-DENS 8” Single Wall Rigid Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description Image Z-DENS Adaptor -Laars MagnaTherm MGTH/V 20002ZDLAMTØ8 2500 to 8" (200 mm) Z-DENS Stainless Steel 2ZDP824 Z-DENS Pipe 8" L = 24” UVGrey 2ZDP836 Z-DENS Pipe 8" L = 36” UVGrey 2ZDP872 Z-DENS Pipe 8" L = 72” UVGrey 2ZDTP8 Z-DENS Test Port 8" (200 mm) L = 16.
Catalogue Z-DENS Cascade Systems Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCSK43 Z-DENS Cascade Starter Kit 4" x 3" (45°) x 25.6" L 2ZDCEK43 Z-DENS Cascade Extension Kit 4" x 3" (45°) x 25.
Catalogue Z-DENS 2"/4" Concentric Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCP2412 Z-DENS Concentric Pipe 2"/4" (60/100 mm) L = 12" PPs/Aluminum White 2ZDCP2424 Z-DENS Concentric Pipe 2"/4" (60/100 mm) L = 24" PPs/Aluminum White 2ZDCP2436 Z-DENS Concentric Pipe 2"/4" (60/100 mm) L = 36" PPs/Aluminum White 2ZDCAP24 Z-DENS Concentric Adjustable Pipe 2"/4" (60/100 mm) L = 2.6" to 8.
Catalogue Z-DENS 2"/4" Concentric Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDTG4 Z-DENS Termination Guard 6" x 6" (150 x 150 mm) Stainless Steel Horizontal 2ZDCTH24 Z-DENS Concentric Termination Horizontal 2"/4" (60/100 mm) L = 31.5" (800 mm) 2ZDCTV24 Z-DENS Concentric Termination Vertical 2"/4" (60/100 mm) H1 = 21.4" (543 mm) H2 = 45.
Catalogue Z-DENS 2"/4" Concentric Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCFB4 Z-DENS Concentric Fixing Bracket/Support Clamp (with Rubber Lining) 4" (100 mm) 2ZDWPT24 Z-DENS Wall Plate Termination SUPPORT 2"/4" (60/100 mm) AluminumWhite 2ZDWP4 Z-DENS Wall Plate 4" (100 mm) Galvanized-White 2ZDGL Z-DENS Gasket Lubricant 2ZDG2 Z-DENS Gasket 2” (60 mm) - Replacement Rigid or Concentric-Black EPDM 2ZDG2V Z-DENS Gasket 2” (60 mm) Replaceme
Catalogue Z-DENS 3"/5" Concentric Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCP3512 Z-DENS Concentric Pipe 3"/5" (80/125 mm) L = 12" PPs/AluminumWhite 2ZDCP3524 Z-DENS Concentric Pipe 3"/5" (80/125 mm) L = 24" PPs/AluminumWhite 2ZDCP3536 Z-DENS Concentric Pipe 3"/5" (80/125 mm) L = 36" PPs/AluminumWhite 2ZDCAP35 Z-DENS Concentric Adjustable Pipe 3"/5" (80/125 mm) L = 2.4" to 8.
Catalogue Z-DENS 3"/5"" Concentric Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDI2435 Z-DENS Increaser 2”/4” to 3”/5” (60/100 mm to 80/125 mm) L = 6.9" (175 mm) PPs/Aluminum-White 2ZDTG5 Z-DENS Termination Guard 9"x 9" (225 x 225 mm) Stainless Steel Horizontal 2ZDCTH35 Z-DENS Concentric Termination Horizontal 3"/5" (80/125 mm) L = 30.9" (785 mm) 2ZDCTV35 Z-DENS Concentric Termination Vertical 3"/5" (80/125 mm) H1 = 21.7" (550 mm) H2 = 45.
Catalogue Z-DENS 3"/5" Concentric Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDFB5 Z-DENS Fixing Bracket/Support Clamp (with Rubber Lining) 5" (125 mm) 2ZDWPT35 Z-DENS Wall Plate Termination SUPPORT 3"/5" (80/125 mm) Aluminum-White 2ZDWP5 Z-DENS Wall Plate 5" (125 mm) Galvanized-White 2ZDGL Z-DENS Gasket Lubricant 2ZDG3 Z-DENS Gasket 3” (80 mm) - Replacement Rigid or Concentric-Black EPDM 2ZDG3V Z-DENS Gasket 3” (80 mm) Replacement Rigid or
Catalogue Z-DENS 4"/6" Concentric Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDCP4612 Z-DENS Concentric 4"/6" (110/160 mm) L = 12" PPs/AluminumWhite 2ZDCP4624 Z-DENS Concentric 4"/6" (110/160 mm) L = 24" PPs/AluminumWhite 2ZDCP4636 Z-DENS Concentric 4"/6" (110/160 mm) L = 36" PPs/AluminumWhite 2ZDCAP46 Z-DENS Concentric Adjustable Pipe 4"/6" (110/160 mm) L = 3.2" to 8.
Catalogue Z-DENS 4"/6" Concentric Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDI3546 Z-DENS Increaser 3”/5” to 4”/6” (80/125 mm to 110/160 mm) L = 6.5" (165 mm) PPs/Aluminum-White 2ZDIS4646 Z-DENS Increaser Small 4"/6" (100/150 mm to 110/160 mm) L = 6.3" (160 mm) 2ZDI4646 Z-DENS Increaser 4"/6" (110/150 mm to 110/160 mm) L = 6.
Catalogue Z-DENS 4"/6" Concentric Polypropylene Vent System for High Efficiency Condensing Appliances Image Part ID Description 2ZDFB6 Z-DENS Fixing Bracket/Support Clamp (with Rubber Lining) 6" (160 mm) 2ZDWPT46 Z-DENS Wall Plate Termination SUPPORT 4"/6" (110/160 mm) Aluminum-White 2ZDWP6 Z-DENS Wall Plate 6" (160 mm) Galvanized-White 2ZDGL Z-DENS Gasket Lubricant 2ZDG4 Z-DENS Gasket 4” (110 mm) - Replacement Rigid or ConcentricBlack EPDM 2ZDG4V Z-DENS Gasket 4” (110 mm) Replacement Rigid
Terms and Conditions The items described in this document and other documents provided by NovaFlex Hose Inc., NovaFlex Industries Inc., Z-Flex U.S. Inc., their subsidiaries and their authorized representatives (“Seller”) are available for sale at prices established by Seller. An order from any customer (“Buyer”) shall be governed by all of the following terms and conditions of sale (“Terms and Conditions”).
Z-FLEX ® The Engineered Venting Systems Specialists Recent developments in flue systems for use with high efficiency heating appliances, combined with the increased familiarity of use and installer confidence in polypropylene venting systems, has led to the development and continuous improvement of the polypropylene Z-DENS system. Z-Flex® now offers the Z-DENS Polypropylene Venting System to our highly acclaimed product line-up.
