Assembly Instructions

7
1.Mounting the Body Frame to the Chamber
1.With the help of another person, carefully place the Grill Chamber on a piece of carboard.
Attach the 2 Left Legs (38) by inserting them into the base of the Grill Chamber Assembly (1)
and sttsching using Bolts (46), Spring Washer (60) and Gasket (57). Caution: The grill is
very heavy. Always lift the grill with 2 people. ( Do not over tighten)
2.Attach Right Rear Leg (41) and the Right Front leg (42) to the Grill Chamber Assembly (1)
by using Bolt (46), Spring Washer (60) and Gasket (57).(Do not over tighten)
3.Attaching Bottom Plate (37) on the 4 legs using Bolts (46).
4.Insert the Axle (44) through the holes in the Right Rear Leg (41) and Right Front Leg (42).
On one side of the Axle (44) place a Gasket (56). Then place one Wheel (43) on the Axle (44)
followed by Gasket (47), Spring Washer (45) and Gap Nut (51). Repeat this step for the
other side of the Axle (44). Use the Wrenches (55) to tighten.